Technical Specification:
sewing speed | 6m/min |
stitch length | 6/7spi |
needle system | SN62*5721 |
needle size | 22/140 |
voltage | 1 phase 220V 50hz |
current (amps) | 10.1 |
weight | 190kg |
sewing speed | 6m/min |
stitch length | 6/7spi |
needle system | SN62*5721 |
needle size | 22/140 |
voltage | 1 phase 220V 50hz |
current (amps) | 10.1 |
weight | 190kg |
Sewing speed | 6m/min |
Handle strap width | <75mm |
Sewing thickness | <15mm |
Tape fabric width | 40mm |
Voltage | single phase |
Power | 850W |
Weight | 220KG |
SB-80 Heavy-Duty Flanging Machine is mainly used for flanging mattress panel and over-thick fabric. It can also sew that non-woven fabric together with the panel.
Flanging Thickness | 35-80mm |
Flanging Width | 30mm |
Max Rotate Speed | 5000rpm |
Stitch Length | 2-5mm |
Needle Model | RM-6 22-23# |
Needle Gauge | 2.0, 3.0, 5.0mm |
Air Presure | 0.5-0.8MPa |
Sewing head type | PEGASUS |
Upper feed belt available | Yes |
Needle bar type | Double-bar |
Pneum cut flanging | Yes |
Power Supply | 380/220V, 50HZ, Single-Phase |
Total Power | 550W |
Machine weight | 180KG |
This machine is mainly used to double serge mattress side panel. It has two independent sergers, synchronization of them is controlled by two AC motors with frequency converter velocity modulation, the machine has two servo drive variable speed puller with long lasting urethane rollers, material tensioning device, and rewinder. Machine has excessive material auto-cutting device along with a vacuum scrap-collection device. Additionally, it is equipped with thread break detection device as well as material splice auto-stop device.
Serging mode | Single border, Dual border |
Sewing width | 5 – 7 mm |
Serging width | 150-500 mm (adjustable) |
Serging speed | 15-30 M/min (adjustable) |
Max. Material thickness | ≤ 20mm (middle density) |
Needle Pitch | 0 – 6 mm(adjustable) |
Max. Presser lift | 15 mm |
Rated air pressure | 0.5-0.8 Mpa |
Power | 2.5 KW |
Sewing head | Chain Stitch (Japan) |
Mattress border fabric width | 100 -370mm (adjustable) |
border width | 18mm(adjustable) |
3D fabric border width | 85 mm(adjustable) |
non-woven fabric width | 85 mm(adjustable) |
sewing speed | 6 m/min |
Power | 0.58 KW |
Dimension | 3.6 × 1.5 × 1.6m |
Voltage | 1phase 220V 50Hz |
Weight | 90kg |
Max Rotating Speed | Lock Stitch |
Sewing Width | <=400mm |
Sewing thickness | <=40mm |
Output | 1<=m/min(depends on pattern) |
Needle Gauge | 4-6mm |
Total power | 1.5 KW |
Power supply | 1 phase 220V 50Hz |
Setup Area | 4.0 × 1.9 × 1.7m |
Max Speed | 2000RPM |
Sewing Width | <=400mm |
Sewing thickness | <=30mm |
Output | 1~5m/min |
Needle Stitch | 4-6mm |
Total power | 3.0 KW |
Power supply | 220V 50Hz |
Max Speed | 2000RPM |
Sewing Width | <=400mm |
Sewing thickness | <=30mm |
Output | 1~5m/min |
Needle Stitch | 4-6mm |
Total power | 3.0 KW |
Power supply | 220V 50Hz |
sewing width | 5~7 mm |
side-lock width range | 50-450mm |
side-lock speed | 15-30m/mm |
sewing thickness | <=25mm |
Needle Stitch | 0~6mm |
Total power | 1.5 KW |
Power supply | 220V 50Hz |
sewing width | 5~7 mm |
side-lock width range | 50-450mm |
side-lock speed | 15-30m/mm |
sewing thickness | <=25mm |
Needle Stitch | 0~6mm |
Total power | 1.5 KW |
Power supply | 220V 50Hz |
Sewing head | Chain stitch |
Number of needles | 52 |
Feeding system | multineedle function fabric feeding |
Control sensor | Yes |
Automatic needle -up | Yes |
Border Rolling Unit | Automatic |
Max. Fabric Width | 45cm |
Max. Sewing width | 34cm |
Setup area | 3.9×1.5×1.6m |
Needle Quantity | 33 |
Space between needles | 3/16, 1/4 |
Zipper width | 32mm |
Sewing speed | 6m/min |
mattress fabric width | 100-360mm(adjustable) |
border width | 18mm(adjustable) |
3D fabric border width | 85mm(adjustable) |
non-woven fabric width | 85mm(adjustable) |
power | 0.98KW |
Dimension | 3.6*1.5*1.6m |
Double needle chain stitch sewing head runs automatically with automatic unwind and wind-up mechanisms. Just put on the rolls of material, press start and work on another job Automatic material run out and thread break sensors automatically shut down the machine.
sewing type | Chain Stitch |
sewing speed | 6m/min |
end products width | <360mm, =360mm |
Tape width | 32 mm |
zipper width | 31-32 mm |
needle type | 62*57 |
presser foot height | 5/16″(7.94mm) |
motor type | servo needle positioner |
max thichness | 1/2″(12.7mm) |
voltage | 1phase 220V |
weight | 200 kg |
Sewing speed | 6m/min |
table top size | 1150*700mm |
Maximum speed | 1800RPM |
Total Power | 0.98KW |
Power supply | 220V, 50HZ |
Weight | 160KG |
Head type | Chain stitch |
Sewing speed | 5m/min |
Sewing width | 450mm(adjustable) |
Non-woven width | 120mm(adjustable) |
Voltage | single phase, 220V, 50HZ |
Area | 3.9*1.5*1.6m |
Power | 1.88KW |
Weight | 260KG |
Sewing speed | 6 m/min |
Handle strap width | 50-55mm |
Sewing thinkness | <6mm |
Fabric width | 75mm(tape) |
Space of the threads | multiple of 6.35(two or four threads) |
Voltage | 1phase 220v 50HZ |
Power | ≤850W |
Weight | 220 kg |
Sewing head type | Lock stitch(double capacity) |
Standardized size | 220×(50×50)mm |
Working table size | 1210mm×580mm |
Needle pitch | 3,4,5mm |
Sewing speed | max.2500rpm / min |
Sewing thickness | <9.5mm |
Total power | 600W |
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.